Your TM-T82 Wireless printer can be set up using an iPad. Follow the steps below to configure your printer for wireless printing.

1. Ensure the Ethernet cable is firmly connected behind the Printer Device.
   
   
2. Connect the printer to the power source using the power cable
3. Verify the printer is turned on (there should be a blue light on the front/top of the printer)

Verify IP Address & Log into Epson Web Config

When the printer is connected and turned on a test slip will print automatically. Note the IP address and SSID (network) on the test slip. Then follow instructions for connecting your iPad to the same SSID (network).

Example Test Slip



Connect Epson printer

1. Click on settings button from bottom of the dashboard.
2. Enter Quick access password.
3. Select Printer option.
4. Click on Bluetooth/TCP option.
5. Click on TCP option
6. Click on the Scan button.
7. It will appear the list of the available printer.
8. It will appear Printer IP address next to Status option.
9. Select the EPSON printer option which status is online.
10. You can also click on the test printer button to check the printer connection.